Nokia
· IMEI Number *#06#
For checking the IMEI (International Mobile Equipment Identity).

· Security Code 12345
Default security code is 12345. If you forgot your security code,
there's so many program on the net which allowed you to know the
security code likes Security ID Generator, Nokia IMEI Changer, etc.
Resetting Security Code

If you accidentally lock the phone or forgot the security code,
the best thing to do is check it with your local Nokia dealer.
For advanced user, you can use WinTesla, PCLocals or LogoManager
program to read the security code or resetting the code (You will need an FBUS/MBUS (or compatible) cable to do this.

· Software Version *#0000#
For checking the phones software (SW) - called firmware revision information.
e.q : Version V. 4.51 (26-03-98) will display
V 04.51
26-03-98
NSE-1
first line:
The Software Version (my guess is that this software has been used in previously
Nokia-phones, what do you say?!).

second line:
The Date of the SW release.
third line:
NHE-8 has something to do with the type of phone you are dealing with.
Is it GSM 900 (standard), GSM 1800 (DCS1800) or GSM 1900 (PCS1900)?
Nokia 2110, 3110, 8110(i) are all NHE types.
The only thing that vary is the code after NHE- (“8”).
NHE = GSM 900, NHK =GSM 1800 - The number in the end = the model (2110i = 4 etc.)

· Software Update
The only thing to do (for you and me) is for us to go to the nearest Nokia dealer and make him do it for you.
Just remember that it is supposed to be free (a receipt is required) so don't let him tell you anything else!

· SIM clock *#746025625# [*#sim0clock#]
to check if the Sim-Clock can be Stopped.
This option is depen on your service provider network.
(Sim-clock-stop is a kind of standby mode which will save battery time)


· Waranty Code *#92702689# [*#war0anty#]
Menu:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0698)
3. Displays (if there) the date where the phone was purchased (MMYY) you can here set the Purchasing Date
(Warning: You can only do this once - so be careful what you write)
4. Displays the date of the last repairment - if found (0000)
5. The next screen has Transfer User Data? (the same option as the 8110)
6. To exit turn the phone off and then back on.

· SP Lock The Service provider (SP) lock
Is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator,
if one inserts a SIM card from a different operator the phone will refuse to accept it!
The cell phone will however accept another SIM card from the same operator.

All Nokia phones (2110 and newer) have four different SIM locks which can be used to lock the phone for up to 4 different providers.
But most phones with restriction only have one lock activated. ( lock 1)
The main code used in Nokia phones is:
#pw+(master code)+Y#
This code is able to check, activate or remove Sim card restriction (SP-lock).
Use the * key to get the p, + and w chars.
'Y' has to be 1,2,3 or 4 - depending of what lock you what to deal with.

#pw+1234567890+1# for Provider-Lock status
#pw+1234567890+2# for Network-Lock status
#pw+1234567890+3# for Provider(???)-Lock status
#pw+1234567890+4# for SimCard-Lock status
(master code) is a 10 digit code, based on the phones IMEI number.

To remove restriction on lock 1 type following code:
#pw+(master code)+1#
If you just want to check your phone use 10 random numbers Eg. 1234567890 as the (master code)
eq. To check if phone if restricted on lock 1 type the following code:
#pw+1234567890+1#
Please NOTE that these codes could be used with care!
A user told me that it's only possible to type in about 3 different codes on each lock!
Then something bad will happen ..therefore be careful!

· How can I check what locks have my phone closed?
There is 2 methods:
1. Use winlock to see the state of the locks, pressing Read Info.The Counter is the number of times
that you have tried unlock your phone using an incorrect master code.
2. You can check it entering an imaginary mastercode on your phone but, it's not recommended because
if you try enter a code 5 times your phone will not work anymore. By example,
if you press at your phone #pw+1234567890+2# (note that ‘#’, ‘p’, ‘w’ and ‘+’ characters must be selected from ‘*’ key)
and your phone give you Code Error then your phone have lock 2 closed,
if you get the message SIM Restriction Off your phone have lock 2 opened.
Look the table above to see how can check all locks:

Lock number Description Sequence to Check
1 Provider Lock #pw+1234567890+1#
2 Network-Lock #pw+1234567890+2#
3 Another Provider Lock #pw+1234567890+3#
4 SIM Card Lock #pw+1234567890+4#

· Unlock SP-Lock
Here is a way to Unlock your phone which is Service Provider locked, without to know SPLock code.
With a Nokia 16xx/21xx/31xx/51xx/81xx that are SIMlocked to one privider you can bypass the SP lock like this:
First of all, PIN CODE MUST BE ON, then press:
C
<arrow down>
C and hold until it clears display
* and hold until start to blink
* and hold until start to blink
04*<your pin>*<your pin>*your pin>#
Each time you turn your phone OFF it resets the lock, so this need to be done each time you'll turn your phone ON

The phone now says: PIN CODE CHANGED (or ACCEPTED)
and the SIM card is accepted until you restart the phone again.
NOTE: On vesion 5.04 Nokia has removed this option !

· Bypass the SP-lock

With a Nokia 16xx/21xx/31xx/51xx/81xx that are SIM locked to one privider you can bypass the SP lock like this:
1. Insert sim card of diferent provider.
2. Turn on the phone and press the UP VOLUME key for 3 sec. then release it and the phone says PIN CODE ?
3. Press the “C” key.
4. Then Press * and wait until it desapear and apear again, then press * one more time and 04*PIN*PIN*PIN#

The phone now says: PIN CODE CHANGED (or ACCEPTED)
and the SIM card is accepted until you restart the phone again

· Main Code #pw+(master code)+Y#
This code is able to check, activate or remove Sim card restriction (SP-lock).

Use the * key to get the p, + and w chars.
'Y' has to be 1,2,3 or 4 - depending of what lock you what to deal with.

#pw+1234567890+1# for Provider-Lock status
#pw+1234567890+2# for Network-Lock status
#pw+1234567890+3# for Provider(???)-Lock status
#pw+1234567890+4# for SimCard-Lock status

(master code) is a 10 digit code, based on the phones IMEI number.

· Enhanced Full Rate Codec (EFR)
Enhanced Full Rate will give you much better sound quality when you enable it.
The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction)
compression technology.
This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC.
The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation).
Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more)

*3370# and EFR will be activated after a reboot of the phone ( consumes more power )

#3370#
and EFR will be switched off after a reboot of the phone.

· Half Rate Codec (HR)
Half Rate will give you bad sound quality, which gives the service provider the opportunity to
have more calls on the network; and you might get a lower charge from them. (Will give you 30% longer talk-time)
*4720# Half Rate coded will be activated after a reboot of the phone ( better standby time )
#4720# Half Rate coded will be de-activated after a reboot of the phone

· Unblocking Code
Unblock PIN1 : **05*PUK*newPIN1*newPIN1#@
UnBlock PIN2 : **052*PUK2*newPIN2*newPIN2#@

· Hiding your phone number
Dial 141 then the number you want to call eg. 141#######
This should stop your number been sent to the caller. (*)
(*) This only works on UK phones, if anybody has tried this and works, please let me know.

· Unlocking PIN2 for software version
V 05.07
20.11.98
NSE-1

If your SimCard is locked by your SP, you can check it and if it is, you will get the “wrong code”
message on the display (for <mastercode> use 1234567890)
If your SimCard is locked by your SP, you can't unlock PIN2 !
(Thanks to Adrian Oprea for the tips)

· Blocking phone number at Cantel AT&T

If you have one of those cantel at&t phones if you press #0000# you can block your number
at no extra charge.

(Thanks to Tommy Huy Pham for the tips)

· New Menu on Emergency Calls *3001#12345#

Brings a new menu that gives you access to the emergency calls ( 112Etc. ).
It will give you FREE calls! (only the ones you put in the emergency!! )

This option will depend on your GSM operator

(Thanks to Tzahi Shemesh for the tips)

· Your number in your display
1. Goto menu 3-7 Call cost settings.
2. Turn ON the Call costs' limit 3-7-1. PIN2 code Required.
3. Put in the limit with the phone number.
eg. my phone # is 019 2184697
Enter the limit as 2184697
4. Goto menu 3-7-2 Show costs in. PIN2 code Required.
5. Select Currency.
6. Enter Unit price : 1
7. Enter Currency name as 019 (per my phone # eg. above)
Now the phone number 019 2184697 will remains on the 4th row of the display.
Secondly, if you press the # key, it prompt which line to be used; Line 1 or 2.

· Free Call Tip

The tips needs Net Monitor enabled. Be aware that the trick will remove
Netmonitor in some sw versions like v4.73 and v5.04.
1. Launch the Net Monitor in your Nokia 51xx / 61xx
2. Execute the test number 497
3. Free calling for about 90 sec should now have been activated.

(The trick has not been confirmed working yet).

· Nokia 5110 PIN-Out

Pin-Outs: Bottom view, keyboard up, counting from the left

V V 1 2 3 4 5 6 V
(o) | | [= = = = = =] | |
7 8 9 10 11 12

1 - VIN CHARGER INPUT VOLTAGE 8.4V 0.8A
2 - CHRG CTRL CHARGER CONTROL PWM 32Khz
3 - XMIC MIC INPUT 60mV - 1V
4 - SGND SIGNAL GROUND
5 - XEAR EAR OUTPUT 80mV - 1V
6 - MBUS 9600 B/S
7 - FBUS_RX 9.6 - 230.4 KB/S
8 - FBUS_TX 9.6 - 230.4 KB/S
9 - L_GND CHARGER / LOGIC GND

Call Diverting

All
To Activate: * * 21 * NUMBER # [SEND]
To Cancel: # # 21 # [SEND]
To Check: * # 21 # [SEND]
No Answer
To Activate: * * 61 * NUMBER # [SEND]
To Cancel: # # 61 # [SEND]
To Check: * # 61 # [SEND]
Unreachable
To Activate: * * 62 * NUMBER # [SEND]
To Cancel: # # 62 # [SEND]
To Check: * # 62 # [SEND]
Busy
To Activate: * * 67 * NUMBER # [SEND]
To Cancel: # # 67 # [SEND]
To Check: * # 67 # [SEND]
To Cancel All Call Forwarding # # 002 # [SEND]

Diverting Data Calls

All
To Activate: * * 21 * NUMBER * 25 # [SEND]
To Cancel: # # 21 # * 25 [SEND]
To Check Status: * # 21 # * 25 # [SEND]
No Answer
To Activate: * * 61 * NUMBER * 25 # [SEND]
To Cancel: # # 61 * 25 # [SEND]
To Check Status: * # 61 # * 25 # [SEND]
Unreachable
To Activate: * * 62 * NUMBER * 25 # [SEND]
To Cancel: # # 62 # * 25 # [SEND]
To Check Status: * # 62 # * 25 # [SEND]
Busy
To Activate: * * 67 * NUMBER * 25 # [SEND]
To Cancel: # # 67 # * 25 # [SEND]
To Check Status: * # 67 # * 24 # [SEND]

Diverting Fax Calls

All
To Activate: * * 21 * NUMBER * 13 #[SEND]
To Cancel: # # 21 # * 13 # [SEND]
To Check Status: * # 21 # * 13 # [SEND]
No Answer
To Activate: * * 61 * NUMBER * 13 # [SEND]
To Cancel: # # 61 * 13 # [SEND]
To Check Status: * # 61 # * 13 # [SEND]
Unreachable
To Activate: * * 62 * NUMBER * 13 # [SEND]
To Cancel: # # 62 # * 13 # [SEND]
To Check Status: * # 62 # * 13 # [SEND]
Busy
To Activate: * * 67 * NUMBER * 13 # [SEND]
To Cancel: # # 67 # * 13 # [SEND]
To Check Status: * # 67 # * 13 #[SEND]

Call Barring

Before you can activate these barring services you will need a barring code from your service provider.
Call Barring can not be activated if Call Forwarding diverts are already in use.

All Calls
To Activate: * 330 * BARRING CODE # [SEND]
To Cancel: # 330 * BARRING CODE # [SEND]
To Check: * # 330 # [SEND]
All Outgoing Calls
To Activate: * 333 * BARRING CODE # [SEND]
To Cancel: # 333 * BARRING CODE # [SEND]
To Check: * # 333 # [SEND]
All Incoming Calls
To Activate: * 353 * BARRING CODE # [SEND]
To Cancel: # 353 * BARRING CODE # [SEND]
To Check: * # 353 # [SEND]
All Outgoing Calls
To Activate: * 33 * BARRING CODE# [SEND]
To Cancel: # 33 * BARRING CODE # [SEND]
To Check: * # 33 # [SEND]
All Outgoing International Calls
To Activate: * 331 * BARRING CODE# [SEND]
To Cancel: # 331 * BARRING CODE # [SEND]
To Check: * # 331 # [SEND]
All Outgoing International Calls Except To Home Country
To Activate: * 332 * BARRING CODE# [SEND]
To Cancel: # 332 * BARRING CODE # [SEND]
To Check: * # 332 # [SEND]
All Incoming Calls
To Activate: * 35 * BARRING CODE # [SEND]
To Cancel: # 35 * BARRING CODE # [SEND]
To Check: * # 35 # [SEND]
All Incoming Calls When Outside Home Country
To Activate: * 351 * BARRING CODE # [SEND]
To Cancel: # 351 * BARRING CODE # [SEND]
To Check: * # 351 # [SEND]
Canceling All Call Barring # 330 * BARRING CODE # [SEND]

Call Waiting

To Activate: * 43 # [SEND]
To Deactivate: # 43 # [SEND]
To Check: * # 43 # [SEND]

Calling Line Identity

Outgoing
To Activate: * 31 # [SEND]
To Deactivate: # 31 # [SEND]
To Check: * # 31 # [SEND]
Incoming
To Activate: * 30 # [SEND]
To Deactivate: # 30 # [SEND]
Below are various TIPSnTRICKS based on the Nokia mobile phones.
Different ones will work for different models, but most of them will work for all models.
To check the IMEI (International Mobile Equipment Identity) Type-
*#06#
Information you get from the IMEI-
XXXXXX XX XXXXXX X
TAC FAC SNR SP
· TAC = Type approval code
· FAC = Final assembly code
· SNR = Serial number
· SP = Spare
To check the phones Software revision type-
*#0000#
Information you get from the Software revision-
V 05.31
18-02-99
NSE-3
· 1ST Line = Software revision
· 2ND Line = The date of the software release
· 3RD Line = Phone type
To enter the service menu type-
*#92702689# (*#WAR0ANTY#)
· Serial number (IMEI)
· Production date (MM/YY)
· Purchase date (MM/YY) You can only enter the date once.
· Date of last repair (0000=No repair)
· Transfer user data to another Nokia phone via Infra-Red
Clock Stopping
To check weather your SIM Card supports clock stopping type-
Please not this is not for free calls. This feature is to check weather your sim card supports “Clock Stopping”.
If your sim does support it, your phone will consume less battery power than if it didn't support it.
*#746025625# (*#SIM0CLOCK#)
Revealing the Headphone and Car-Kit menus
Please note that if you do these next tricks, the new menus can't be
erased without retoring the factory default settings.
To do these tricks you need to short-circuit the pins on the bottom
of the phone next to where you plug in you charger.

1. To activate the “Headset” menu, you need to short-circuit pins “3” and “4”.
After a short time the word “Headset” will be shown in the display. Menu 3-6 is now enabled.

2. To activate the “Car” menu, you need to short-circuit pins “4” and “5”.
After a short time the word “Car” will be shown in the display. Menu 3-7 is now enabled.
THE REBOOT TRICK
This should work on all software versions of the 6110.

1. Go to the Calendar (Menu-8)
2. Make a note or reminder.
3. Enter some text into the edit box.
4. Hold “Clear” until the whole text is cleared, then press “Back”.
5. Press “0”. The main screen will now be showing but a space appears on the screen. (you can't see it)
6. Enter 4 digits (e.g. 1234).
7. Use the down arrow to move the cursor to the left side of the numbers and the space (Down arrow twice).
8. Now enter 6 digits and press the call button.
Wait for a few seconds, the screen should start to flash and reboots. It should alsowork
on other menus like the “Profiles” menu.
EFR CALL QUALITY
To activate EFR (Enhanced Full Rate) Enter the code-
*3370#
This improves call quality but decreases batterylife by about 5%
To deactivate it, Enter the code-
#3370#
THE JAMES BOND TRICK

If you short-circuit theleft middle and right pins on the bottom of the phone
with all connections touching each other,the Nokia software hangs!
The profile “Headset” will be activated. Before you do this just activate the “Automatic Answer”
in the headset profile and set the ringing volume to “Mute”.
Now you can use your phone for checking out what people are talking about in a room.
Just place it under a table in a room and call it.
The phone receives the call without ringing and you can listen to what people are saying.

NETWORK MONITOR
There is a hidden menu inside your Nokia phone. If you want to activate it,
you'll have to re-program some chips inside of your phone.
1. Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.
2. Take apart the phone.
3. De-solder the EEPROM (ATMEL AT 24C64).
4. Read out the data with an EEPROM programmer and save it to a file (Backup).
5. If you have v.33 or v4.73, change the address “03B8” from “00” to “FF”.
6. If you have v5.24 then change the address “0378” from “00” to “FF”.
7. Write the new data to the EEPROM and solder it back to the phone,
8. Power on your phone and you should have “Netmonitor” enabled.
The Network Monitor gives you the following information.
· Carrier number
· MS RX Level in DBM
· Received signal quality
· S TX power level
· C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99.
· RTL (Radio link timeout).
· Timeslot
· Indication of the transmitter status
· Information on the Network parameters.
· TMSI (Temporary Mobile Subscriber Identity).
· Cell identification (Cell ID, Number of cells being used).
· MCC (Mobile country code)
· MCN (Mobile network code)
· LAC (Location area code)
· Ciphering (On/Off)
· Hopping (On/Off)
· DTX (On/Off)
· Discard cell barred information.
CHECK SIM-LOCK
Note - If you bought your Nokia on UK Vodafone or UK Cellnet you do not need to
check this because they both transmit on GSM900, and they don't lock the phones.
However if you bought your phone on UK Orange or UK One2one your phone may be blocked.
The reason is that they both transmitt on GSM1800. To make a call on GSM1800 you need
what is known as a “Dual band” phone. A dual band phone is able to transmit on both GSM900 and GSM1800, s
o they lock the phones so you can't use it with any other network simcard. If you find that your phone
is locked you can try different software to unlock it. (we havn't found one that works yet),
or you can ask your service provider who will gladly exchange the 10 digit code for about £35.
This is how to check the status of the 4 different locks. Aslo don't try entering the wrong number,
because after 3 times it will block the phone for good.
There are 4 different locks on your Nokia phone.
· COUNTRY-LOCK
· NETWORK-LOCK
· PROVIDER-LOCK
· SIMCARD-LOCK
The code to read out the sim-lock status of your phone is
#PW+(MASTERCODE)+(Y)#
· # = DOUBLE-CROSS
· W = PRESS “*” THREE TIMES
· P = PRESS “*” FOUR TIMES
· + = PRESS “*” TWO TIMES
· MASTERCODE = 1234567890
· Y = NUMBER 1 TO 4
The master code is a secret code. The code has 10 digits,
To read out the sim-lock status you can enter every combination you want!
“Y” Shows the status of the network-lock.
Here you can enter a number from “1” to “4”. The “4” is for the sim-card lock.
SIM-LOCK CHECKS
· #PW+1234567890+1# = GIVES PROVIDER-LOCK STATUS
· #PW+1234567890+2# = GIVES NETWORK-LOCK STATUS
· #PW+1234567890+3# = GIVES COUNTRY-LOCK STATUS
· #PW+1234567890+4# = GIVES SIM-CARD-LOCK STATUS.
VODAFONE “PAY AS U TALK”
If you are on the Vodafone pay as you talk service within the UK,
you can check the balance of your friends “Pay as you talk” phone without them even knowing.
What you need to do is very simple indeed, just dial “1345” from your phone.
You will then be asked to enter your telephone number. Enter the number of your friends phone,
and it tells you how much credit they have left and how many days are remaining.
Remember that both phones need to be on the Vodafone “Pay as you talk” service.


NOKIA 2110 AND 2110 i
Show IMEI code
What's the IMEI code of your phone, simply press:
* # 06 #
you'll read it on display.
Software Version
This codes shows you software version,
software date and hardware model number of your phone.
On 2110, type:
* # 9999 #
On 2110i, may function one of the followings:
* # 170602112302 # or
* # 682371158412125 #
Show manufact. date

To get the manufacturing date of your phone, press:
* # 3283 # (= *#date#)
in 1995 phones, date is in “mmyy” format, 1996 and later
phones show date in “wwyy” format.
Unlock SP lock
Here is a way to Unlock your phone which is Service Provider locked, without to know SPLock code !!!!
Give it a try
Turn the phone on, when the phone asks
for the Security Code,
press:
112
<send>
now quickly press:
#
send
end
send
end.
Each time you turn your phone OFF it resets the lock,
so this need to be done each time you'll turn your phone ON
Anyway it's better than nothing, isn't it?
NOKIA 3110
Show IMEI code
What's the IMEI code of your phone, simply press:
* # 06 #
you'll read it on display.
Software Version
This code shows you software version, date of manufacture and hardware model number of your phone.
* # 3110 #
Show warranty information
To get additional information from your phone you can use the so called
“warranty codes”, try typing:
*#92702689# (= *#war0anty#).
You will be asked a ‘warranty code:’
type:
6232 (OK) : To display the Month and Year of Manufacture.
7332 (OK) : To display the date of the last repairment.
7832 (OK) : To display (if previously set) the date where the phone was purchased.
9268 (OK) : To display the Serial Number.
37832 (OK) : To set the Purchasing Date MMYY (Warning: You can only do this once)
87267 (OK) : To Confirm Transfer
Sim Clock information
To check if the Sim-Clock can be stopped type:
*#746025625# (= *#sim0clock#)
Restore factory settings
To restore factory settings
(This does not include memory, language and counters) type:
*#7780#
SPLock Mode
If you want to inquire your phone about SPlock, you can use the following:
# pw + 1234567890 + [y] #
If you put your hands on your 10 digits SPlock code yet, then you can modify the status of the above results, typeing:
# pw + [mastercode] + [y] #
where:
[y] is 1 up to 4, and
any ten digits number seems working instead of “1234567890”
Unlock SP lock
Here is a way to Unlock your phone which is Service Provider locked,
without to know SPLock code !!!!
Give it a try:
First of all, PIN CODE MUST BE ON, then press:
C
<arrow down>
C and hold until it clears display
* and hold until start to blink
* and hold until start to blink
04*<your pin>*<your pin>*your pin>#
Each time you turn your phone OFF it resets the lock,
so this need to be done each time you'll turn your phone ON
Anyway it's better than nothing, isn't it?
Nokia Cellular Data Suite
Want to use your laptop to send fax and data with your 3110's Nokia Phone ?
Using the Nokia Data Suite you'll be able to do this and much more …!!
NOKIA 3210
Show IMEI code
What's the IMEI code of your phone, simply press:
* # 06 #
you'll read it on display.
Half Rate Codec
Half Rate Codec will decrease sound quality but it gives you about 30%
lower battery consumption.
You may enable it by this code:* 4720 #
or disable it:# 4720 #
Sim Clock information
To check if the Sim-Clock can be stopped type:
*#746025625# (= *#sim0clock#)
SPLock Mode
If you want to inquire your phone about SPlock, you can use the following:
# pw + 1234567890 + [y] #
If you put your hands on your 10 digits SPloock code yet,
then you can modify the status of the above results, typeing:
# pw + [mastercode] + [y] #
where:
[y] is 1 up to 4, and
any ten digits number seems working instead of “1234567890”
NOKIA 5110
Show IMEI code
What's the IMEI code of your phone, simply press:
* # 06 #
you'll read it on display.
Software Version
This code shows you software version, date of manufacture and hardware model number of your phone.
* # 0000 #
Show Service Menu
To get additional information from your phone you can use the
so called “warranty code”, try typing:
*#92702689# (= *#war0anty#).
Now you are in service menu where you'll find:
1 IMEI (International Mobile Equipment Identification)
2 Made MM/YY (date of production of the phone mm/yy)
3 Purchasing Date (here you can enter the date of purchase.
If you enter an incorrect date, you cannot correct it later !
4 Repaired (date of repair, if there was one)
5 Transfer user data?
Enhanched Full rate codec
*3370# EFR will be activated after a reboot of the phone ( consumes more power )
#3370# EFR will be switched off after a reboot of the phone.
Half rate codec
*4720# Half Rate coded will be activated after a reboot of the phone ( better standby time )
#4720# Half Rate coded will be de-activated after a reboot of the phone
Profiles Menu
If you press the “Power on”
button for a short moment, the menu with the profiles is shown on the display.
If you press one more time,
the mobile turns itself off.
You can use the up and down cursor keys to scroll and enable a different alert setting.
Unlock SP lock
Here is a way to Unlock your phone which is Service Provider locked,
without to know SPLock code !!!!
Give it a try:
First of all, PIN CODE MUST BE ON, then press:
C
<arrow down>
C and hold until it clears display
* and hold until start to blink
* and hold until start to blink
04*<your pin>*<your pin>*your pin>#
Each time you turn your phone OFF it resets the lock,
so this need to be done each time you'll turn your phone ON
Anyway it's better than nothing, isn't it?
NOKIA 6110 / 6150
Show IMEI code
What's the IMEI code of your phone, simply press:
* # 06 #
you'll read it on display.
Software Version
This code shows you software version, date of manufacture
and hardware model number of your phone.
* # 0000 #
if the above won't work, try this one too:
* # 6110 #
Show Service Menu
To get additional information from your phone
you can use the so called “warranty codes”, try typing:
*#92702689# (= *#war0anty#)
now you can just scroll through the information like in any other menu.
If it won't work and the phone ask you for a ‘warranty code:’ try:
6232 (OK) : To display the Month and Year of Manufacture.
7332 (OK) : To display the date of the last repairment.
7832 (OK) : To display (if previously set) the date where the phone was purchased.
9268 (OK) : To display the Serial Number.
37832 (OK) : To set the Purchasing Date MMYY (Warning: You can only do this once)
87267 (OK) : To Confirm Transfer
Enhanched Full rate codec
*3370# EFR will be activated after a reboot of the phone ( consumes more power )
#3370# EFR will be switched off after a reboot of the phone.
Software Bug
Someone reported us that some Nokia 6110 remain
dead if you run out of battery while the phone has its keyboard locked.
Nokia seems to be aware of this bug and
hopefully will be correct in next software version (6110i maybe ??).
Profiles Menu
If you press the “Power on”
button for a short moment, the menu with the profiles is shown on the display.
If you press one more time,
the mobile turns itself off.
You can use the up and down cursor keys to scroll and enable a different alert setting.
Pin Out
1 - VIN CHARGER INPUT VOLTAGE 8.4V 0.8A
2 - CHRG CTRL CHARGER CONTROL PWM 32Khz
3 - XMIC MIC INPUT 60mV - 1V
4 - SGND SIGNAL GROUND
5 - XEAR EAR OUTPUT 80mV - 1V
6 - MBUS 9600 B/S
7 - FBUS_RX 9.6 - 230.4 KB/S
8 - FBUS_TX 9.6 - 230.4 KB/S
9 - L_GND CHARGER / LOGIC GND
NOKIA 8110 / 8110 i
Show IMEI code
What's the IMEI code of your phone, simply press:
* # 06 #
you'll read it on display.
Software Version
This code shows you software version, date of manufacture
and hardware model number of your phone.
* # 8110 #
Show Service Menu
To get additional information from your phone
you can use the so called “warranty codes”, try typing:
*#92702689# (= *#war0anty#)
now you can just scroll through the information like in any other menu.
If it won't work and the phone ask you for a ‘warranty code:’ try:
6232 (OK) : To display the Month and Year of Manufacture.
7332 (OK) : To display the date of the last repairment.
7832 (OK) : To display (if previously set) the date where the phone was purchased.
9268 (OK) : To display the Serial Number.
37832 (OK) : To set the Purchasing Date MMYY (Warning: You can only do this once)
87267 (OK) : To Confirm Transfer
Sim Clock information

To check if the Sim-Clock can be stopped type:
*#746025625# (= *#sim0clock#)
Pin-Out
Desktop Charger———————-|
| |
| |
CHARGER–| + TOP OF PHONE -
V V 1 2 3 4 5 6 V
(o) | | [= = = = = =] | |
7 8 9 10 11 12
1 - Charger/System Ground
2 - Accessory Output Supply. (3.4V…10V - 50mA)
3 - External Microphone Input and Accessory Identification
*1,7…2,05 V Headset Adapter Connected
*1,15…1,4 V Compact Handsfree Unit Connected
*2.22…2.56 V Infra Red Link Conneceted
4 - External RF Control Input
*0…0.5V External RF in use
*2.4…3.2V Internal Antenna in use
5 - FBUS Transmit
6 - Serial Control Bus
*Logic Low Level: 0….0.5V
*Logic High Level:2.4V….3.2V
7 - Not Connected
8 - Signal Ground
9 - External Speaker and Mute Control
Mute ON (HF SPEAKER MUTE ):0…0,5 V d.c.
Mute OFF (HF SPEAKER ACTIVE ): 1,0…1,7 V d.c.
10 - Hook Signal
*Hook Off (Handset in Use): 0….0.5V
*Hook On (Handset in Use): 2.4V….3.2V
11 - FBUS Receive
12 - Charging Supply Voltage (Max 16V)
Unlock SP lock
Here is a way to Unlock your phone which is Service Provider locked,
without to know SPLock code !!!!
Give it a try:
First of all, PIN CODE MUST BE ON, then press:
C
<arrow down>
C and hold until it clears display
* and hold until start to blink
* and hold until start to blink
04*<your pin>*<your pin>*your pin>#
Each time you turn your phone OFF it resets the lock,
so this need to be done each time you'll turn your phone ON
Anyway it's better than nothing, isn't it?
NOKIA 8810
Show IMEI code
What's the IMEI code of your phone, simply press:
* # 06 #
you'll read it on display.
Software Version
This code shows you software version, date of manufacture
and hardware model number of your phone.
* # 0000 #
Show Service Menu
To get additional information from your phone
you can use the so called “warranty codes”, try typing:
*#92702689# (= *#war0anty#)
You'll get the following:
serial nunber
manufacture date
the date of purchase (if entered)
the date of the last repairment
transfer user data
Sim Clock information
To check if the Sim-Clock can be stopped type:
*#746025625# (= *#sim0clock#)
NOKIA 9000
Show IMEI code
What's the IMEI code of your phone, simply press:
* # 06 #
you'll read it on display.
Software Version
This code shows you software version of your Communicator:
*#682371158412125#
Date of Manufacture
This code shows you the manufacturing date of your Communicator:
*#3283# (or *#DATE#)